Combo of W3001 Temperature Controller With 2 Piece 3inch Fan + 12v 2amp Adapter + Alligator Clip + DC Female Jack

XH-W3001 AC 220V 1500W Digital Thermostat Switch:

This is XH-W3001 AC 220V 1500W Digital Temperature Controller Microcomputer Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at a very low cost.

It offers a high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 110℃.

The LED display shows the results clearly. One can directly install or embed the XH-W3001 in industrial control equipment panel, convenient and quick.

12V Adopter/Charger:

This is a 12V 1A Power Adapter with 4.2mm and 2.7mm double male barrel jack connector. It comes in a black plastic enclosure with long two core wire. The power adapter is durable and can accept 100-240V AC supply with 50/60Hz. It comes with a small led indicator to check the state of Power Adapter.

3 inch - 12V - DC Cooling Fan:

This Brushless DC Cooling Fans are operating at 12V with a dimension of 80x80mm. They are typically found in ATX Computer cases, servers, and other enclosed equipment but they can also be used in a variety of other projects requiring moderate airflow. The fan spins at ~2600 RPM and can move approximately 30CFM. It is fairly quiet – just 30.7dBA. There are two connectors commonly found in PCs on the end – a 4 pin Molex connector designed to fit in line with older style hard drive connectors and a smaller 3 pin Molex KK 2.54mm that is compatible with our 3 pin Molex Header. To use the fan, simply connect Red to 12V, Black to Ground. The White wire is a Tach signal – it can be used to monitor the fan rotation or left disconnected if it isn’t needed.

DC Female jack:

This is a DC Female Jack Connector with Wire. It has many applications. It can be used for any 3 to 24 volt up to 5 Ampere applications. It can also be used to replace the damaged adapter cable 5mm dc female connector.

DC Crocodile Alligator Clip Black and Red Pair:

Alligator clips are frequently used in school physics laboratories to quickly and cheaply assemble circuits. They are useful for connecting components to wires. Alligator clips can be used as miniature clamps to hold parts together for gluing and wires together for soldering.